Advantage Tiltaway 4-Bike Rack Carrier
➜ Use Heininger10 for flat 10% off on orders over $150
-
Estimated Delivery:Apr 23 - Apr 27
-
Free Shipping & Returns: Orders over $100
Advantage Tiltaway 4-Bike Rack Carrier
Most of us need to be able to access our vehicle's rear storage area when out recreating with our bikes. So it's a pain when the bike rack is in the way.
Heininger's Advantage TiltAWAY bike rack solves that problem. Not only is it one of the most affordable hitch-mounted 4-bike bike racks available, it also allows you to tilt the carrier (even with bikes loaded) away from your car making it easy to get to the things you need.
Able to be assembled easily in 15 minutes. It fits 2-inch hitches and comes with an anti-wobble device. Its steel construction is covered with a durable black powder coating and comes with a limited lifetime warranty. The saddles are adjustable, allowing the TiltAWAY bike rack to hold odd-shaped, kids and womens bikes.
Features
- When not in use, the support arms fold down out of the way.
- Tilts away from vehicle
- Arms fold down when not in use
- Fits 2-inch receiver hitches
- Comes with an anti-wobble device
Specifications
| Length | 39.5 Inches |
| Height | 36.25 Inches |
| Width | 12 Inches |
| Arms Length | 11.25 Inches |
| Clearance Required | 10 Inches |
| Fit | 2X2 Inches Receiver Type Hitch |
Disclaimer: Do NOT install any hitch mounted bicycle or cargo carrier on a trailer or other towed vehicle. Apply caution to mounting a carrier on some motorhomes with a long distance between the rear axle and the tail-end of the coach. Bike and cargo carriers will increase the overall length of the vehicle. Use greater caution when backing up.
Frequently Asked Questions
– Yes
Does it fit a 1¼ x 1¼” receiver?
– No
How do I use the Anti-Wobble device that is located inside the receiver tube?
– The yellow (or sometimes blue) plastic nut retainer containes a square nut that is kept from rotating by the retainer.
- Tighten this bolt very tight with a wrench.
- Once the alignment is complete, insert the 5/8” x 1.5” bolt with the lock washer on it into that hole on the side of the square tube where the nut is closest.
- Locate the hole you wish to use to attach the carrier and make sure the nut (inside the retainer) aligns with that hole.
– No, our bike racks are not suitable for Ebikes. Even if you are only putting one Ebike on a rack, we do not advise doing this.
Heininger Holdings began in 1998 as a team effort by a group of highly engaged people with a passion for producing innovative, fun and useful products that make the journey easier and the destination better. I’m humbled to say that for nearly 25+ years, we’ve been doing just that, every day, from our home base in Bellingham, Washington - USA
Featured On
Popular Magazines & Newspapers
We Are Also On
Follow @heininger_holdings_llc
Tag us on your Instagram photos for a chance to be featured on our social channels.
